Setting Design rule

Discussion on the Schematic Capture module of the Proteus Design Suite.
Post Reply
CEP_Claude
Professional User
Posts: 27
Joined: Tue 2015-08-11 12:16
Location: Geneva

Setting Design rule

Post by CEP_Claude »

Hi

Where can I Setting Design rule ?

thanks
Claude
Top
p.erasmus
Professional User
Posts: 227
Joined: Thu 2013-10-31 22:17

Re: Setting Design rule

Post by p.erasmus »

you can click on the design rule icon on the menu bar and the design rule manager will open
Attachments
123.JPG
123.JPG (99.8 KiB) Viewed 588 times
P Erasmus
-------------------------------------------------------------------------------
Micro Controllers execute your code not your intensions
Top
CEP_Claude
Professional User
Posts: 27
Joined: Tue 2015-08-11 12:16
Location: Geneva

Re: Setting Design rule

Post by CEP_Claude »

sorry
I would like to change setting of the electrical rules check in Isis
Attachments
Sans titre 2.jpg
Sans titre 2.jpg (25.88 KiB) Viewed 583 times
Top
Ettore
Labcenter Staff
Posts: 2936
Joined: Fri 2006-03-03 11:56
Location: Milan
Contact:
Contact Ettore

Re: Setting Design rule

Post by Ettore »

I regret but you cannot change these.
Most of those settings, however, would not make sense to be changed, as for example OP -> OP.
Kind regards,
Ettore Arena - Labcenter Electronics.
Top
Post Reply

Return to “Schematic Capture”