Discussion on both general simulation and Proteus VSM microcontroller simulation.
-
miclinli
- Unlicenced User
- Posts: 4
- Joined: Tue 2007-04-24 23:35
- Location: China
Post
by miclinli »
How to simulate P8xCE598 MCU included in the library of
MCS8051? Actually I don't know how to connect its HEX file
with the MCU.Please see the attachment,Thanks!
Mic
-
Attachments
-
- pic.PNG (17.73 KiB) Viewed 264 times
-
Ettore
- Labcenter Staff
- Posts: 2932
- Joined: Fri 2006-03-03 11:56
- Location: Milan
-
Contact:
Post
by Ettore »
The processor you mention is not supported for simulation, so you cannot attach any .hex file.
Kind regards,
Ettore Arena - Labcenter Electronics.
-
miclinli
- Unlicenced User
- Posts: 4
- Joined: Tue 2007-04-24 23:35
- Location: China
Post
by miclinli »
Oh,It's a pity,but it has been really listed in the library and even has schematic drawing as bellow.
-
Attachments
-
- p8xce598.png (41.81 KiB) Viewed 243 times
-
rberek
- Expert User
- Posts: 45
- Joined: Wed 2006-03-08 13:16
- Location: Ottawa, Canada
Post
by rberek »
That's so you can use it to create a PCB. Not every component is meant for simulation.
-
miclinli
- Unlicenced User
- Posts: 4
- Joined: Tue 2007-04-24 23:35
- Location: China
Post
by miclinli »
I see,thank you very much.
Mic