Hi
We bought pick and place line recently, I am reworking all the boards to be compatible with new machine. One of the devices we do consist 3 pcb's.
As we do small runs, I want all 3 on one panel. I created panel and all well and good but suddenly, I have no option to generate pick and place file for the panel. So my question is how to do it?
Thanks in advance.
Panelisation.....
Re: Panelisation.....
That is not currently supported, requiring pick and place to be done on the individual boards after they have been broken out from the panel.
-
ArmandAanekre
- Unlicenced User
- Posts: 1
- Joined: Fri 2023-10-20 13:57
Re: Panelisation.....
This is really something that is would be nice to have.
I want to use JLCPCB's assembly service on a design that consists of three small boards.
If I order these three boards separate, they can of course assemble the three cards separate, but it costs 40USD to set up the machine for each card.
My only option now is to combine the three cards in one PCB design and create the slotting and mouse bites manually.
I want to use JLCPCB's assembly service on a design that consists of three small boards.
If I order these three boards separate, they can of course assemble the three cards separate, but it costs 40USD to set up the machine for each card.
My only option now is to combine the three cards in one PCB design and create the slotting and mouse bites manually.