Renumbering components added to an array.
Renumbering components added to an array.
Hi I recently had an array that I wanted to add LEDs to, is there a way to renumber it in the schematic it without individually numbering each part?
- Attachments
-
- Capture.JPG (159.66 KiB) Viewed 3757 times
Pro 2 with advanced simulation
Re: Renumbering components added to an array.
In case of total reannotation:
Tool menu, "Global Annotator" with Total mode selected. This will reannotate all components of schematic as per the selected Scope.
In case of a particular group of components to reannotate:
1) Multiple tag the components to reannotate.
2) Call "Property Assignment Tool", with String: REF=?, Action: Assign, Apply to: Global Tagged and finally press OK. All REF of the tagged components will be set to "?"
3) Call "Global Annotator" with Incremental mode selected.
Tool menu, "Global Annotator" with Total mode selected. This will reannotate all components of schematic as per the selected Scope.
In case of a particular group of components to reannotate:
1) Multiple tag the components to reannotate.
2) Call "Property Assignment Tool", with String: REF=?, Action: Assign, Apply to: Global Tagged and finally press OK. All REF of the tagged components will be set to "?"
3) Call "Global Annotator" with Incremental mode selected.
Kind regards,
Ettore Arena - Labcenter Electronics.
Ettore Arena - Labcenter Electronics.
Re: Renumbering components added to an array.
Thanks for the help Ettore.
This is what I got,I wanted the lower left LED to be 1, it's 54 and the upper right LED to be the highest number LED.
This is what I got,I wanted the lower left LED to be 1, it's 54 and the upper right LED to be the highest number LED.
- Attachments
-
- Capture.JPG (153.69 KiB) Viewed 3739 times
-
- Capture2.JPG (65.76 KiB) Viewed 3739 times
-
- Capture3.JPG (161.95 KiB) Viewed 3739 times
Pro 2 with advanced simulation
Re: Renumbering components added to an array.
Hi,
Use the Property Assignment Tool ('A' on the keyboard).
String = REF=D#
Number = 1
Count=1
Select 'On Click' and click OK. Now click on each component and it will assign the next increased reference.
Regards,
Dave.
Use the Property Assignment Tool ('A' on the keyboard).
String = REF=D#
Number = 1
Count=1
Select 'On Click' and click OK. Now click on each component and it will assign the next increased reference.
Regards,
Dave.