Hello
I have created a multi part element for a Raspberry PI Compute module (one element per connector) and when I go to the PCB layout I get this error message: Conflicting property values: had EID=11 and EID=10 in multi-element device. [M1:A]
If I delete the parts and place them again, the error message remains but with incremented EIDs, and the reported offending part is the last one I placed.
Thanks
Nicolas, Alciom
Cryptic netlist error message with heterogenous multipart element
-
- Professional User
- Posts: 105
- Joined: Mon 2006-03-13 13:22
- Location: Chaville, France
- Contact:
Re: Cryptic netlist error message with heterogenous multipart element
Update : The error went away all by itself once I assigned a package to the device.
I needed to use the PCB design tool to create the package before being able to assign it...
Nicolas, Alciom
I needed to use the PCB design tool to create the package before being able to assign it...
Nicolas, Alciom
Re: Cryptic netlist error message with heterogenous multipart element
Hi Nicolas,
Yes, Multielement heterogeneous parts are linked via the Footprint so they know which part they belong to. Assigning a package should fix the issue.
Regards,
Dave.
Yes, Multielement heterogeneous parts are linked via the Footprint so they know which part they belong to. Assigning a package should fix the issue.
Regards,
Dave.