See attached Project files.
I have edited a generic 18 pin device to to be a MCP2515 chip purely for schematic use.
But when I make device and save it to the USERDVC library all the pin numbers disappear and are replaced by ?
MAKE DEVICE MCP2515
Re: MAKE DEVICE MCP2515
You forgot to attach the project file.
Anyway, I guess you get '?' instead of the pin number as you didn't link a suitable Packaging to your schematic symbol. If no Package is attached to the part then the pin number makes no sense.
Anyway, I guess you get '?' instead of the pin number as you didn't link a suitable Packaging to your schematic symbol. If no Package is attached to the part then the pin number makes no sense.
Kind regards,
Ettore Arena - Labcenter Electronics.
Ettore Arena - Labcenter Electronics.
-
- Professional User
- Posts: 41
- Joined: Thu 2011-02-17 17:57
Re: MAKE DEVICE MCP2515
I try again.
I attached generic 18 pin package I think but as you say just get ?
Forum says ERROR
Could not upload attachment to ./files/13119_bd7ab8308534e5050d9ae12e0cf72377.
Will not let me attach project file ????????
I attached generic 18 pin package I think but as you say just get ?
Forum says ERROR
Could not upload attachment to ./files/13119_bd7ab8308534e5050d9ae12e0cf72377.
Will not let me attach project file ????????
Re: MAKE DEVICE MCP2515
Yes, it seems you're correct. I confirm the problem with attachments files in the new version of the forum.
Alternatively you may send your project file to support@labcenter.com .
Alternatively you may send your project file to support@labcenter.com .
Kind regards,
Ettore Arena - Labcenter Electronics.
Ettore Arena - Labcenter Electronics.
-
- Professional User
- Posts: 41
- Joined: Thu 2011-02-17 17:57
Re: MAKE DEVICE MCP2515
I have sent an e-mail.
Re: MAKE DEVICE MCP2515
I've been informed about the attachments issue has been fixed. You may attach your file now if like to.
Kind regards,
Ettore Arena - Labcenter Electronics.
Ettore Arena - Labcenter Electronics.
-
- Professional User
- Posts: 41
- Joined: Thu 2011-02-17 17:57
Re: MAKE DEVICE MCP2515
Ok. The problem is because - for some reason - the pin numbers are missing in the A column.
This will add the pin numbers automatically and save you from adding them all manually.
However I attach the fixed file for your convenience.
In order to make things working again you need first to press "Delete" to remove the package and then press again "Add" to link a fresh DIL18.This will add the pin numbers automatically and save you from adding them all manually.
However I attach the fixed file for your convenience.
Kind regards,
Ettore Arena - Labcenter Electronics.
Ettore Arena - Labcenter Electronics.
-
- Professional User
- Posts: 41
- Joined: Thu 2011-02-17 17:57
Re: MAKE DEVICE MCP2515
Hmm sorry i can't open that file as my Proteus is only 8.3 SP2.
I'll try and fix my version.
I'll try and fix my version.