Hi
I need a resistor network - with 4 isolated resistors in a Sip package.
I have created a device and linked it to the correct package. (attached).
It works fine for PCB layout - however I would like an updated model for simulation - can someone indicate how this can be done.
The resistors need to act as analog resistors.
Also - I would like to be able to do pin swop and element swop in Ares.
Regards
Frank
Isolated resistor network - simulation
Isolated resistor network - simulation
- Attachments
-
- Isolated_resistor_network.pdsprj
- (11.72 KiB) Downloaded 48 times
FJF
CarlowIT
CarlowIT
Re: Isolated resistor network - simulation
It is attached here in the zip file.
The schematic model is in the NET8SIP.pdsprj; point RN1 with mouse and press CTRL+C to see the schematic of the model within the part.
CTRL+X to return at the Root sheet. The file NET8SIP.MDF is the compiled version of the model; Tool->Model Compiler.
As for you have created RES8SIP it only allows for pin swap but not gate (element) swap. In order to get gate swap as well you need to create your network as a multi-element homogenous . The file 'Isolated_resistor_network_1.pdsprj' shows how this is done.
The schematic model is in the NET8SIP.pdsprj; point RN1 with mouse and press CTRL+C to see the schematic of the model within the part.
CTRL+X to return at the Root sheet. The file NET8SIP.MDF is the compiled version of the model; Tool->Model Compiler.
As for you have created RES8SIP it only allows for pin swap but not gate (element) swap. In order to get gate swap as well you need to create your network as a multi-element homogenous . The file 'Isolated_resistor_network_1.pdsprj' shows how this is done.
- Attachments
-
- Isolated_resistor_network.zip
- (18.14 KiB) Downloaded 59 times
Kind regards,
Ettore Arena - Labcenter Electronics.
Ettore Arena - Labcenter Electronics.
Re: Isolated resistor network - simulation
Thanks for the help Ettore
I will use NET8SIP for now and come back creating a multi-element homogenous device later.
Regards,
Frank
I will use NET8SIP for now and come back creating a multi-element homogenous device later.
Regards,
Frank
FJF
CarlowIT
CarlowIT