Problem on Proteus 7.2 SP2

Discussion on both general simulation and Proteus VSM microcontroller simulation.
Post Reply
ITISVARESE
Professional User
Posts: 27
Joined: Mon 2007-01-08 9:28

Problem on Proteus 7.2 SP2

Post by ITISVARESE »

After upgrade to 7.2 SP2 when simulating circuit with PIC 18 (also examples) i receiv this error message and circuit not work:
Batch mode model creation function(s) not found in PIC18.DLL
Top
JohnJ
Site Admin
Posts: 522
Joined: Wed 2006-02-15 23:21
Location: Head Office
Contact:
Contact JohnJ

Post by JohnJ »

Please see here:

http://support.labcenter.co.uk/forum/vi ... php?t=1294
John Jameson - Chief Software Architect,
Labcenter Electronics.
Top
karadev
Unlicenced User
Posts: 12
Joined: Sun 2006-08-27 10:57
Location: Bulgaria
Contact:
Contact karadev

this link is not active

Post by karadev »

hi, this link is not active , where we can view info about this problem
Top
rberek
Expert User
Posts: 45
Joined: Wed 2006-03-08 13:16
Location: Ottawa, Canada

Post by rberek »

This link works fine if you are a registered user.
Top
Gilbert
Unlicenced User
Posts: 1
Joined: Wed 2008-07-09 3:33

Re: Problem on Proteus 7.2 SP2

Post by Gilbert »

ITISVARESE wrote:After upgrade to 7.2 SP2 when simulating circuit with PIC 18 (also examples) i receiv this error message and circuit not work:
Batch mode model creation function(s) not found in PIC18.DLL
i encountered a similar one: when i used 7.1 SP2 to simulate a circuit with a OSCILLOSCOPE,it failed with the inf._"Model creation funtion(s) not found in DSO.DLL"
i wander what caused the problem.

ps:the previous replys don't help ,as it (the link) links to the host page.
Top
David
Site Admin
Posts: 2267
Joined: Mon 2006-02-20 14:56
Location: Head Office
Contact:
Contact David

Re: Problem on Proteus 7.2 SP2

Post by David »

Hi Karadev,

Please PM me your customer number and I will provide you with more information.

Kind regards,
David Spencer - Labcenter Electronics.
Top
Post Reply

Return to “Simulation”