Hi,
my vsm code is failing to compile for the simulation of the attached simple arduino lcd connection. it is showing the eroor message as shown attached code picture, what could the problem and measurement:
Thanks,
vsm code error
-
- Unlicenced User
- Posts: 2
- Joined: Sat 2023-09-30 11:50
vsm code error
- Attachments
-
- cource code 1.png (82.68 KiB) Viewed 958 times
-
- arduino simulation 1.png (143.01 KiB) Viewed 958 times
Re: vsm code error
As you can see it does work to me! If It doesn't to you is possibly because of your project setup but we can't help without looking at your project.
So, please attach the full Proteus project (the .pdsprj file, no simple screen shot) including the full (and possibly correct) source code.
So, please attach the full Proteus project (the .pdsprj file, no simple screen shot) including the full (and possibly correct) source code.
Kind regards,
Ettore Arena - Labcenter Electronics.
Ettore Arena - Labcenter Electronics.
-
- Unlicenced User
- Posts: 2
- Joined: Sat 2023-09-30 11:50
Re: vsm code error
Thanks for that, here is my attached document with its source code.
- Attachments
-
- Arduino LCD Connect 1.pdsprj
- (28.97 KiB) Downloaded 386 times
Re: vsm code error
As I said above - and picture below shows it's working now - you've made a wrong project setup including a number of gross logics and schematic mistakes. Nevertheless, I regret that I cannot help you as it turned out that you are using an illegal (cracked) copy of Proteus.
Please contact support@labcenter.com and purchase your Proteus copy.
Topic locked.
Please contact support@labcenter.com and purchase your Proteus copy.
Topic locked.
Kind regards,
Ettore Arena - Labcenter Electronics.
Ettore Arena - Labcenter Electronics.