I am trying to simulate a simple LED blinking project and when I start the simulation I get the messages in the attached image.
Could you tell me what this problem could be?
Thank you.
ERROR simulating pic16F18877
-
- Unlicenced User
- Posts: 2
- Joined: Sun 2023-09-10 10:46
ERROR simulating pic16F18877
- Attachments
-
- error.png (32.36 KiB) Viewed 834 times
Re: ERROR simulating pic16F18877
We can't know it without looking at your project. Please attach the full Proteus project (the .pdsprj file) including the source code.
Kind regards,
Ettore Arena - Labcenter Electronics.
Ettore Arena - Labcenter Electronics.
-
- Unlicenced User
- Posts: 2
- Joined: Sun 2023-09-10 10:46
Re: ERROR simulating pic16F18877
Thank you very much for the reply
I attach the files you request.
The source is made with the Niple software and compiled with MPASWIN to obtain the ASM and HEX files.
I have observed that if in the EEPROM data declaration within the ASM file I change the value 0xF000 to 0x4820 and regenerate the HEX file, the program seems to work.
The program is to flash an LED.
I attach the files you request.
The source is made with the Niple software and compiled with MPASWIN to obtain the ASM and HEX files.
I have observed that if in the EEPROM data declaration within the ASM file I change the value 0xF000 to 0x4820 and regenerate the HEX file, the program seems to work.
The program is to flash an LED.
- Attachments
-
- Prueba.zip
- (37.26 KiB) Downloaded 557 times
Re: ERROR simulating pic16F18877
Sorry, but it turned out that you are using an illegal (cracked) copy of Proteus and as such, we won't provide you with any support.
Please contact support@labcenter.com and purchase your Proteus copy.
Topic locked.
Please contact support@labcenter.com and purchase your Proteus copy.
Topic locked.
Kind regards,
Ettore Arena - Labcenter Electronics.
Ettore Arena - Labcenter Electronics.