Oscilloscope Resize and CSV Output

[martin2020]

Hi All,

Hope you are all well.

Would it be possible to have a resize option for the Oscilloscope please. When using higher resolution monitors the Oscilloscope shrinks.

Also can there be an option to output the resultant waveforms to a CSV file, data-points against time index akin to a physical Oscilloscope please?

Kind Regards,

Martin

[David]

Hi,

Regarding the Osc size, While in simulation, right click on the Oscilloscope and select Window size > x2

Regards,
Dave.

[Richard_Marron]

This is a really helpful feature!

There seems to be a bug though in that the dashed line showing where 0V is (for each of the channels), shows 5 graticules high, when the oscilloscope is at twice size. It's fine at normal size. This seems to be independent of the gain setting, or AC/DC/GND/ OFF settings.

It would also be really helpful if the Gain and Time settings had a little more range (I thought at one time it was possible to just type in the values into the boxes to push it that bit further, but it doesn't seem to allow that anymore?)

[Richard_Marron]

Is this a setup issue, or a bug that needs fixing?