One of the main things we want to bring in at V8.11 is a direct import DXF -> Copper mechanism. This would translate any incoming line data into tracking and an incoming solid object into a zone.
The main goal is to better support antenna design although it may well have other, more general uses. To get this right it's quite important to see as many real world example DXF files as possible. So, if you've ever imported to a mech layer and then traced over then please e-mail us in your DXF file(s).
You can send them straight to support @ labcenter.com
Thanks for the help!
Iain.
Importing DXF Files
Re: Importing DXF Files
Iain,
I recently did a project where I used an led on a PCB to backlight a face plate on an audio design. It worked great!
I recently did a project where I used an led on a PCB to backlight a face plate on an audio design. It worked great!
- Attachments
-
- Capture.JPG (184.97 KiB) Viewed 4770 times
-
- Class D Katie leds - CADCAM.ZIP
- (44.65 KiB) Downloaded 575 times
-
- Class D Katie leds - CADCAM.ZIP
- (44.65 KiB) Downloaded 573 times
Pro 2 with advanced simulation