FDC1004 does not work

Discussion on both general simulation and Proteus VSM microcontroller simulation.
Post Reply
JTCyborg
Unlicenced User
Posts: 1
Joined: Wed 2021-02-10 12:14
Location: Usa
Contact:
Contact JTCyborg

FDC1004 does not work

Post by JTCyborg »

FDC 1004 does not work, the FE and FF registers are not read, the measurement mode does not start, the status bytes in the 0C register do not change.
Top
Ettore
Labcenter Staff
Posts: 2932
Joined: Fri 2006-03-03 11:56
Location: Milan
Contact:
Contact Ettore

Re: FDC1004 does not work

Post by Ettore »

JTCyborg wrote:FDC 1004 does not work, the FE and FF registers are not read, the measurement mode does not start, the status bytes in the 0C register do not change.
It seems you are correct at the first glance.
I'm investigating, although it's pretty odd as the simulation model has been not changed from when it has been tested and validated the first time.
Kind regards,
Ettore Arena - Labcenter Electronics.
Top
Ettore
Labcenter Staff
Posts: 2932
Joined: Fri 2006-03-03 11:56
Location: Milan
Contact:
Contact Ettore

Re: FDC1004 does not work

Post by Ettore »

FDC1004 bug found. The fixed model will be in the next Proteus service pack.
Kind regards,
Ettore Arena - Labcenter Electronics.
Top
Post Reply

Return to “Simulation”