Labcenter Community Support Forums

There are dangers to doing this before export, not least that the PCB won't correspond to the schematic. In particular therefore, I would not recomment you try this with live netlisting switched on. As Dennis mentioned you also must not clear the netlist because you will lose plane connections. You ...

You can't create a panel consisting of PCB's with different layer sets because the panel can only have one layer set.

Thanks for the clear explanation. Can you send this test case in so I can attach to the case log please.

support @ labcenter.com.

Alignment works based on the specified extremity of the tagged group rather than to a particular part in the tagged group. align.png I'll log the reference part request on our tracking system for consideration. Note however that you would still have to specify which extremity of the reference part y...

In the current release version (8.7) you can ignore the rules manually by right clicking on the rule in the DRC Viewer window. One of the main features in the version currently in beta (8.8 ) is design rules by area. This allows you to draw out a room, give it a name and then create a rule with clea...

ADI to library is possible and a viable alternative to the above, although there's a little bit of scripting involved. I can mail you a sample script and talk through in more detail if this option is of interest. Please send us a mail to support @ labcenter.com and we'll go from there.

We are expanding our development team and are currently looking for additional software developers to join the Labcenter team.

Please visit the careers page on our website for details and to submit an application.

https://www.labcenter.com/careers/

OpenGL will almost certainly be faster in the 3DV on a modern PC and would be our first choice.

In System - Set Display are you using a hardware accelerated display option ? haccelerated.png In View -> Layers (or click on the status bar to launch) do you have full resist turned on ? resist1.png Assuming so, the resist should be controllable from the second tab on this dialogue. resist2.png If ...

Presumably this is happening with one specific board ? If so, can you mail us the project so we can take a look pls (Support @ labcenter.com)

Hi,

We'll need the project to take a look - can you send to support@ labcenter.com pls.

Are you running 8.7 SP3 ?

Hi Chris,

Not at present. Could you tell us why this would be useful ? Would you want largest contiguous area or accumulated area if multiple copper islands exist ?

Thanks,
Iain.

What version of the software are you using please ?

The only record of this I can find was a bug that was fixed in V8.5 SP1.

Proteus has no way to know which pins should be connected together on the schematic. It is very common that multiple pins are not connected to anything in a given design - there are no 'nets' for such pins because there are no connections. If this is a concern or you wish a way to audit the schemati...

If the project clip is 'schematic+layout' then you should see the layout section ready for placement once you have imported the schematic section into your sub-circuit. You don't need to import the clip again onto the layout - it will appear in the component selector automatically when you import th...