Labcenter Community Support Forums

Wouldn't that be a Monte Carlo simulation?
Yes, it would be nice to have such or similar feature in the future!

Hello everyone!, question on the Ramtron device models (FM24C512-G), what is the device address? according to the datasheet is: 1010 for bits 4-7, 00 for device select bits 3-2, 0 for address MSB bit 1, 0/1 for read or write operation for bit 0. For testing, I placed the select lines (A0,A1) to Grou...

Hello, I'd like to know what lies ahead in the VSM 8.0 major release and its expected date of release. I am starting to see the gap between Proteus VSM and other packages getting smaller, although the microcontroller simulation is still ahead of other packages with the exception of TINA v9. I would ...

Hello, I want to use this samtec part: Description: DUAL BODY, MICRO TERMINAL STRIP Centerline: .050"(1,27MM) refer to weblink: http://www.samtec.com/ProductInformation/TechnicalSpecifications/Overview.aspx?series=FTSH I can create from scratch the ISIS device and the corresponding ARES footpri...

+1

Can the developers @ Labcenter give status on when would these displays be released? ...which ones are being considered for release? etc...etc...

Thanks!

I know electronic assembly's LCD display (EADOGS102W-6) is black and white, but would it be implemented for simulation ever?

Thank you.
http://mouser.com/ProductDetail/ELECTRO ... FinQ%3d%3d

Agreed with quixote and Paul. The process of 'clonning'/rennaming a sub-circuit could be easier, to the point where sub-circuits could be 'clonned', modified, renamed, deleted and managed easier in the future.

cgriffin you are correct, I did paste the back light link, I should have posted the EA DOGS102W link.

The Electronic assembly series EA LEDXXXX of LCD displays: Best of all, they are inexpensive !!!!!!!!! http://www.mouser.com/ProductDetail/ELECTRONIC-ASSEMBLY/EA-LED39x41-A/?qs=sGAEpiMZZMsZtvfwwjgKgZc160u7%252b45G The world wide most flexible Display Series: Superflat, Text, Graphic, SPI, various co...

Problem apparently gone. I did some USB cleanup by uninstalling some old USB drivers I were not using (memory sticks using USBview.exe), turned off some devices not needed at the moment (my scanner, and Universal programmer) rebooted the system, re-installed VSM USB drivers and went thru ok. VSM now...

Can some one help me understand why when I install the Proteus VSM USB drivers (normal procedure before running a sample USB simulation) I get a UpdateDriverForPlugAndPlayDevices Error. After I click OK on such dialog, the driver seems to install ok, but window never recognizes the simulated devices...

use Onderdonk’s equation:
http://www.ultracad.com/articles/fusing.pdf

Please add links to here they buy these displays?

Thanks!

Thank you guys. I was thinking about CSS but since I had seen a post where pic24s may work I was just curious about issues.