Labcenter Community Support Forums

Hello
On the first picture we can see that the auto router was not able to complete the circuit.
While it was easy enough by narrowing down a few tracks and going between the pellets...

Hello I'm trying to design a PCB In the automatic routing I checked "automatic narrowing of tracks" parametres.png But during automatic routing, there is never any track narrowing that is done and the result is not terrible. pcb NOK.png By correcting the tracks manually, you can actually s...

I pulled out a component tester, measured to start with a recent LED, and then tested a few old LEDs 1. Red = 1.95V 2. Yellow = 1.98V 3. Green = 2.65V 4. Blue = 2.8V 5. White = 2.8V 6. UV=3.12V Some very old LEDs 1. IR= 1.14 2. Red 1.6V 3. Orange = 1.8V 4. Green 1.9V On proteus, the voltages are the...

Is it normal for a red LED to have a forward voltage of 2.2 volts? Thank you bugs.pdsprj Moderation Note: Your Miscellaneous post has been splitted and LED Simulation related questions have been placed in to the relevant "Simulation" section of the forum. Please post your questions in the ...

On the PCB module in track mode, if I manually draw a track even if I have selected T40, it will draw me the track in T10, am I doing something wrong? And what can be assigned a runway width on a structural diagram on certain links? If I visualize the wafer in 3D with a red LED helper, does it appea...

Is it possible to compile a project elsewhere than the one that is automatically proposed?

Hello I would like to be able to do an arduino simulation project followed by a PCB If I run Proteus with an Arduino project with firmware, there is no PCB footprint... On the internet, I found an Arduino nano board with an footprint, it is really very well made. https://github.com/cyberponk/Arduino...

Thanks Dave, it works great!

Hi Dave
the file as an attachment
Thank you

Hello
I'm trying to get the HCSR04 to work.
I send a pulse to the "trig" pin
I notice that the "echo" pin remains grey and no pulse comes out of it!
I don't understand what the problem is.
Thank you
https://i.postimg.cc/90ksXrnn/sr04.png