Hello
On the first picture we can see that the auto router was not able to complete the circuit.
While it was easy enough by narrowing down a few tracks and going between the pellets...
Search found 10 matches
- Mon 2024-01-29 19:16
- Forum: PCB Layout
- Topic: automatic narrowing of tracks
- Replies: 2
- Views: 901
- Sat 2024-01-27 14:45
- Forum: PCB Layout
- Topic: automatic narrowing of tracks
- Replies: 2
- Views: 901
automatic narrowing of tracks
Hello I'm trying to design a PCB In the automatic routing I checked "automatic narrowing of tracks" parametres.png But during automatic routing, there is never any track narrowing that is done and the result is not terrible. pcb NOK.png By correcting the tracks manually, you can actually s...
- Wed 2023-11-15 18:35
- Forum: Simulation
- Topic: LED simulation Miscellaneous Questions
- Replies: 3
- Views: 751
Re: Miscellaneous
I pulled out a component tester, measured to start with a recent LED, and then tested a few old LEDs 1. Red = 1.95V 2. Yellow = 1.98V 3. Green = 2.65V 4. Blue = 2.8V 5. White = 2.8V 6. UV=3.12V Some very old LEDs 1. IR= 1.14 2. Red 1.6V 3. Orange = 1.8V 4. Green 1.9V On proteus, the voltages are the...
- Tue 2023-11-14 14:31
- Forum: Simulation
- Topic: LED simulation Miscellaneous Questions
- Replies: 3
- Views: 751
LED simulation Miscellaneous Questions
Is it normal for a red LED to have a forward voltage of 2.2 volts? Thank you bugs.pdsprj Moderation Note: Your Miscellaneous post has been splitted and LED Simulation related questions have been placed in to the relevant "Simulation" section of the forum. Please post your questions in the ...
- Tue 2023-11-14 14:31
- Forum: PCB Layout
- Topic: PCB Miscellaneous questions
- Replies: 1
- Views: 872
PCB Miscellaneous questions
On the PCB module in track mode, if I manually draw a track even if I have selected T40, it will draw me the track in T10, am I doing something wrong? And what can be assigned a runway width on a structural diagram on certain links? If I visualize the wafer in 3D with a red LED helper, does it appea...
- Thu 2023-11-02 12:23
- Forum: Simulation
- Topic: Arduino VSM
- Replies: 1
- Views: 640
Re: Arduino VSM
Is it possible to compile a project elsewhere than the one that is automatically proposed?
Code: Select all
{PROGRAM=R:\temp\VSM Studio\44d902034bed44629f93f333323c5f12\ARDUINO_NANO_1\Debug\Debug.elf}
- Sat 2023-10-28 8:26
- Forum: Simulation
- Topic: Arduino VSM
- Replies: 1
- Views: 640
Arduino VSM
Hello I would like to be able to do an arduino simulation project followed by a PCB If I run Proteus with an Arduino project with firmware, there is no PCB footprint... On the internet, I found an Arduino nano board with an footprint, it is really very well made. https://github.com/cyberponk/Arduino...
- Fri 2023-10-27 15:10
- Forum: Simulation
- Topic: HCSR04 Doesn't work
- Replies: 5
- Views: 1053
Re: HCSR04 Doesn't work
Thanks Dave, it works great!
- Fri 2023-10-27 9:34
- Forum: Simulation
- Topic: HCSR04 Doesn't work
- Replies: 5
- Views: 1053
Re: HCSR04 Doesn't work
Hi Dave
the file as an attachment
Thank you
the file as an attachment
Thank you
- Thu 2023-10-26 16:41
- Forum: Simulation
- Topic: HCSR04 Doesn't work
- Replies: 5
- Views: 1053
HCSR04 Doesn't work
Hello
I'm trying to get the HCSR04 to work.
I send a pulse to the "trig" pin
I notice that the "echo" pin remains grey and no pulse comes out of it!
I don't understand what the problem is.
Thank you
https://i.postimg.cc/90ksXrnn/sr04.png
I'm trying to get the HCSR04 to work.
I send a pulse to the "trig" pin
I notice that the "echo" pin remains grey and no pulse comes out of it!
I don't understand what the problem is.
Thank you
https://i.postimg.cc/90ksXrnn/sr04.png