Search found 102 matches
- Wed 2024-05-01 12:03
- Forum: Simulation
- Topic: memory loss
- Replies: 7
- Views: 629
Re: memory loss
Oh!! Do you mean to say I've been lucky all this time... Isn't there and "auto save". As I said, I have never paid attention to this, this is why it foxed me.. Cheers Anyway. Aha!!! I see why... My autosave was set for 10 minutes. The model I'm working on i probably use a lot less. I'll se...
- Tue 2024-04-30 18:47
- Forum: Simulation
- Topic: memory loss
- Replies: 7
- Views: 629
Re: memory loss
Hi Ettore. I an not doing ANYTHING different than any other time.. The project normally saves automatically after a recompile. I can set a variable in external eeprom from the workspace, run the simulation and all is okay. if I turn off Proteus and restart. the memory has not been saved. IF!!! I act...
- Sat 2024-04-06 7:50
- Forum: Simulation
- Topic: memory loss
- Replies: 7
- Views: 629
Re: memory loss
Hi Ettore
Do you have anything else?
Debug->Reset Persistent Model Data, seems t happen EVERY time I start my project.
All the eeprom write and internal eeprom writes are lost when you start a project
Do you have anything else?
Debug->Reset Persistent Model Data, seems t happen EVERY time I start my project.
All the eeprom write and internal eeprom writes are lost when you start a project
- Wed 2024-04-03 9:34
- Forum: Simulation
- Topic: memory loss
- Replies: 7
- Views: 629
Re: memory loss
Yes! But I want it to retain the data.. and its automatically not doing... Its retrieving that data every time I run Isis. and I don't want it to. Like I said. I had this before and we fixed it somehow. I don't use internal eeprom so I don't know if that is changing,m but the external definitely is....
- Wed 2024-04-03 8:45
- Forum: Simulation
- Topic: memory loss
- Replies: 7
- Views: 629
memory loss
Hello! I had this issue a while back. I cannot remeber the fix. I have a 24LC256 modeled.. When I turn off simulation and restart.. all is okay. If I shut down Isis and restart, it seems to reload the data from disc file instead of the project. I don't think I changed anything.. Help please??? its a...
- Fri 2024-03-01 13:26
- Forum: Simulation
- Topic: Dual POT
- Replies: 3
- Views: 271
Re: Dual POT
Yep! That's what you told me last time.
Cheers
Can you "gang" buttons aswell?
Cheers
Can you "gang" buttons aswell?
- Tue 2024-02-27 20:10
- Forum: Simulation
- Topic: Dual POT
- Replies: 3
- Views: 271
Dual POT
Hello,
I did ask this waaaayyy back and used the advise. But! being me I forgot ( slept since)
I want to control two pots together. linked, bussed, whatever..
Cheers
I did ask this waaaayyy back and used the advise. But! being me I forgot ( slept since)
I want to control two pots together. linked, bussed, whatever..
Cheers
- Mon 2024-02-26 15:47
- Forum: Simulation
- Topic: Not painting correctly
- Replies: 5
- Views: 252
Re: Not painting correctly
Sorry!! I thought you meant delete 1.. I deleted the STATE = 1 and the issue has gone away.
Cheers for that.
Now some serious programming... I really wish you could do an Hitachi H8 532 chip. I wouldn't have to do all this.
Cheers for that.
Now some serious programming... I really wish you could do an Hitachi H8 532 chip. I wouldn't have to do all this.
- Mon 2024-02-26 15:40
- Forum: Simulation
- Topic: Not painting correctly
- Replies: 5
- Views: 252
Re: Not painting correctly
Nope, Sorry. STATE on LCD sticks at 1 STATE on LED sticks at 7
I've zipped the whole folder
See if it happens on your rig
I've zipped the whole folder
See if it happens on your rig
- Mon 2024-02-26 8:24
- Forum: Simulation
- Topic: Not painting correctly
- Replies: 5
- Views: 252
Re: Not painting correctly
Thanks for that..
I'm at work so I'll check later when I get home.
As for the simulation... Geesh it was fraught with errors from the start.. Its my first Pic24 ( its only for testing as the actual; part is a pic 32 with same pinouts )
I'm at work so I'll check later when I get home.
As for the simulation... Geesh it was fraught with errors from the start.. Its my first Pic24 ( its only for testing as the actual; part is a pic 32 with same pinouts )
- Sun 2024-02-25 10:13
- Forum: Simulation
- Topic: Not painting correctly
- Replies: 5
- Views: 252
Re: Not painting correctly
Actually Ettore, Can you move this to my "other" thread as it's kinda the same problem.
I'm starting to think its this laptop.
I'm starting to think its this laptop.
- Sun 2024-02-25 10:03
- Forum: Simulation
- Topic: Not painting correctly
- Replies: 5
- Views: 252
Not painting correctly
]Hello, I have a display problem manifesting since last update.. Only on windows 10 at the mo, Doesn't really make things difficult but here we go.. The simulating is not painting.. I have tried all devices 2D, window GD,I directx and GL, all do the same. I have a screen shot attached. [attachment=0...
- Mon 2024-01-29 12:56
- Forum: Simulation
- Topic: Not another one..
- Replies: 3
- Views: 521
Re: Not another one..
Its kinda weird, But every time I update, ISIS starts and a box appears saying it has to restart. It is as soon as I press run. But this time it didn't do that,it just crashed.. I'm now thinking it may be a windows 3D driver thing.. At home I use win 10 with an NVida card on my Laptop. It never happ...
- Mon 2024-01-29 10:37
- Forum: Simulation
- Topic: Not another one..
- Replies: 3
- Views: 521
Not another one..
One for Ettore, ( maybe ?) On Friday I updated to 8.17, ran some simulation on a pic18xxxx using XC8, I had a severe crash. no computer activity at all. After doing same twice ( Task manager - End task ). I realized there were issues, BUT! the code ran the day before. The culprit was a break point i...
- Mon 2023-08-21 14:52
- Forum: Simulation
- Topic: Interrupt help.
- Replies: 4
- Views: 869
Re: Interrupt help.
Okay! I see the issue. On the first run I forgot to set the timer running, but soon cleared that fault. But the RC1IE only triggered the high interrupt even though it is set for low. BUT! it wasn't.. If I had run it through I would have seen that it was working fully but the COFF was pointing incorr...