Search found 38 matches
- Wed 2009-04-08 1:40
- Forum: PCB Layout
- Topic: How to create custom pad / package?
- Replies: 5
- Views: 491
Re: How to create custom pad / package?
The best I was able to do with a few minutes work was to create a top copper zone .75 inches by 1 inch. Then I created a circular thru hole pad with an inner diameter of .312 in and an outer one of .32 in or so. I then placed the pad in the zone. It worked almost perfectly, except that there was a b...
- Mon 2008-11-24 14:12
- Forum: Simulation
- Topic: Simulation of a serial data trap
- Replies: 2
- Views: 297
Re: Simulation of a serial data trap
I have successfully designed, simulated and built systems using Proteus and CCS C as well as Microchip's C18. As long as you have purchased the VSM models for your microcontroller, it sounds like you are good to go!
- Fri 2008-04-11 14:22
- Forum: Simulation
- Topic: New model with simulation file
- Replies: 1
- Views: 247
Re: New model with simulation file
You will need to provide Labcenter with your customer number in order to get the SDK info to develop simulation files.
- Wed 2007-10-10 14:46
- Forum: Schematic Capture
- Topic: How to connect gnd pin of uln2003 to another pin
- Replies: 4
- Views: 964
- Sat 2007-09-22 10:58
- Forum: Simulation
- Topic: Problem on Proteus 7.2 SP2
- Replies: 5
- Views: 940
- Wed 2007-07-04 17:13
- Forum: Simulation
- Topic: z80 model
- Replies: 4
- Views: 384
- Wed 2007-07-04 16:21
- Forum: Simulation
- Topic: z80 model
- Replies: 4
- Views: 384
This processor is not available for Proteus. You could always make your own simulation model though. In order to do this you need to get the developer's SDK. You can obtain this by signing a nondisclosure agreement with Labcenter Electronics, after proving to them that you have a legal copy of the P...
- Mon 2007-05-07 12:31
- Forum: Schematic Capture
- Topic: Design sheet swap from num key now disabled in 7?
- Replies: 7
- Views: 510
- Fri 2007-05-04 16:50
- Forum: Simulation
- Topic: pic18f4680
- Replies: 1
- Views: 180
- Wed 2007-05-02 2:22
- Forum: Simulation
- Topic: How to simulate P8xCE598
- Replies: 4
- Views: 261
- Sat 2006-12-30 20:17
- Forum: Simulation
- Topic: PIC18F6680 PIC18F6585 simulation error
- Replies: 1
- Views: 294
- Wed 2006-10-25 12:34
- Forum: Simulation
- Topic: How to make a element 8253?
- Replies: 2
- Views: 296
I assume you are saying that you have drawn the element and now you want to simulate it? You have to contact Labcenter with your license info, sign a non-disclosure agreement, and they will send you the instructions on how to create a simulatable device. I have done the above, but have not yet gotte...
- Fri 2006-10-06 11:08
- Forum: Simulation
- Topic: Does VSM simulate external crystal oscs on PIC?
- Replies: 2
- Views: 694
VSM doesn't read the source code, as you are loading a COFF or HEX file into the simulation. The processor clock speed is set when you right-click the PIC component you have placed and the Edit Component dialog pops up. There is a place to enter the processor clock frequency. You don't even need to ...
- Tue 2006-09-26 14:31
- Forum: Simulation
- Topic: component 2SA1015 not available in library
- Replies: 8
- Views: 550
- Tue 2006-09-26 10:30
- Forum: Simulation
- Topic: component 2SA1015 not available in library
- Replies: 8
- Views: 550